Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
You must observe the following points in the interest of your own safety!!!
Safety instructions:
•
The Z-014 causes considerable noise pressure.
Please wear hearing protection in order to avoid noise which can be damaging to your health.
•
When working with the Z-014, small parts may be whirled into the air: Wear protective
goggles to prevent eye injuries.
•
Only use the Z-014 in ventilated spaces.
•
Never operate the Z-014 with more than 8.5bar.
•
Never point the Z-014 towards the face or body.
•
Keep the Z-014 out of the reach of children.
We recommend you never clean any safety-related components, e.g. safety belts, electrical
or electronic modules, with the Z-014.
Special instructions:
The written and spoken information and recommendations which we provide to support the purchase/user, are the result of
previous experience and the latest findings. Because of the manifold possibilities for use and processing conditions, this
information is without obligation and do not constitute a contractual legal relationship or any supplementary obligations of
the sales contract.
In any event, the purchaser holds responsibility for checking suitability for the intended use himself. Always read the safety
warnings for cleaning liquids and contact the manufacturer in case of doubt.
Our liability and repsonsibility is based exclusively on our general terms and conditions of business and are not expanded
on by either this information or the technical advice of our technical field staff.
Operating instructions:
1. Remove loose soiling from the surface you wish to clean (brush or vacuum clean)
2. Important: Hold the cleaning spout at a distance of only 1-3 cm from the surface you are
cleaning.
3. Press the "trigger" all the way; move the Z-014 slowly with circular motions over the
surface you are cleaning.
REQUIRED AIR RATE
To perform to its full potential, the Z-014 requires a constant air pressure of 6-8 bar.
CAUTION:
Constant air rates vary depending on the size and power of the compressor. Always
make sure that the tank and the air hoses are free of impurities of any kind.
15
Werbung
Inhaltsverzeichnis
