Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Air supply and connection hazards:
•
Air under pressure can cause several injury !
•
Always shut off air supply, drain hose of air pressure and disconnect tool from air supply,
when not in use, before changing accessories or maintenance.
•
Never put direct air at yourself or anyone else.
•
Whipping hoses can cause serious injury. Always check for damaged or loose hoses
and fittings.
•
Do not exceed maximum air pressure according on the name plate respectively 8.5 bar.
•
Do not use quick disconnect couplings directly at the tool. See instructions for correct
set-up !
For additional safety information consult:
•
Your employer, union and/or trade association.
•
Council of the European communities and/or local codes
•
,,Safety requirements for hand-held non-electric Power Tools", available from: European
committee for standardization, Rue de Stassart 36. 1050 BRÜSSEL, BELGIEN.
http://www.cen.eu/cenorm/homepage.htm
Maintenance:
•
Damaged or worn out parts should be replaced only by licensed original parts. Get in
contact with your dealer or a authorized service station for support. Using unlicensed
parts male functions could occur followed by possible hurts of health.
•
Check the tool regularly to recognize cracks, unusual clearance, mismatch and to check
the rotary parts for proper operation..
•
Recognizing a abnormality the unit needs to be provided to a authorized service station
before using it again. Please consider that many accidents are cause by insufficient
maintenance.
Tool applications:
•
Pulse pneumatic cleaning gun: To clean carpets in automobiles
14
Werbung
Inhaltsverzeichnis
