Cleaning & Maintenance - Bosch Sensixx`x EasyComfort TDA30 Serie Gebrauchsanleitung

4 Set the iron aside in a vertical position on its heel (11)
to cool down.
Coil the power cable (12) loosely around the heel of
5
the iron. Store the iron in an upright position.
Cleaning & Maintenance
E
Attention! Risk of burns!
Always unplug the appliance from the mains
supply before carrying out any cleaning or
maintenance operation on it.
1 If the iron is only slightly soiled, pull out the plug
and allow the soleplate (10) to cool down. Wipe the
housing and the soleplate with a damp cotton cloth
only.
2 To keep the soleplate smooth, you should avoid hard
contact with metal objects. Never use a scouring pad
or chemicals to clean the soleplate.
Descaling systems
AntiCalc
A "self-clean"
Each time you use the steam regulator (5), the "self-clean"
system cleans the mechanism of scale deposits.
B "anti-calc"
The "anti-calc" cartridge has been designed to reduce the
build-up of scale produced during steam ironing.
C "Calc'nClean" function
The "Calc'nClean" function helps to remove scale
particles out of the steam chamber.
If the water in your area is very hard, you may use this
function approximately every two weeks.
1 Set the steam regulator (5) to the position
Unplug the iron from the mains socket.
* Model dependent
.
19
B OS CH