Radiforce RX240 Gebrauchsanweisung Seite 7

Selecting Display Mode
This function allows easy selection of a desired mode according to monitor application.
RX240/RX340/RX340-AR
Mode
1-DICOM
2-Custom
3-CAL1/4-CAL2/5-CAL3
6-Hybrid-γ
7-sRGB
8-Text
GX240-CL/GX340-CL
Mode
1-DICOM
2-CAL1/3-CAL2
4-Hybrid-γ
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Controlling Monitor Quality
The quality control software "RadiCS LE" (for Windows) is included with this monitor.
To calibrate the monitor and manage the calibration history, install RadiCS LE with reference to the RadiCS LE User's
Manual (on the CD-ROM). Use the RadiCS SelfQC function and built-in Integrated Front Sensor to perform periodic
calibration and Grayscale Check for the monitor independently. For details, refer to the User's Manual (on the CD-
ROM).
Attention
• Connect the monitor to the PC with a USB cable when using RadiCS LE.
Note
• To perform advanced quality control that conforms to medical standards, use the optional monitor quality control software
kit "RadiCS UX1".
Available to display in DICOM mode.
Available for the setting according to your preference.
Displays the screen adjusted by calibration software.
Automatically identifies the display area for the monochrome and color images
on the same screen, and displays each set status.
Suitable for color matching with sRGB compatible peripherals.
Suitable for displaying texts for word processing or spreadsheets.
Available to display in DICOM mode.
Displays the screen adjusted by calibration software.
Automatically identifies the display area for the medical and other images on
the same screen, and displays each set status.
RX240
GX240-CL
RX340/RX340-AR GX340-CL
The mode menu appears.
or while the mode menu is displayed.
Purpose
Purpose
is pressed.
5