English; Ec Declaration Of Conformity; Intended Use; Safety Instructions - Black & Decker KG68 Handbuch

E N G L I S H
ANGLE GRINDER
KG68/KG70/KG75/CD500
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.

EC DECLARATION OF CONFORMITY

KG68/KG70/KG75/CD500
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC,
EN 50144, EN 55014, EN 61000
Level of sound pressure, measured according to
EN 50144:
L (sound pressure)
pA
L (acoustic power)
WA
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50144:
Brian Cooke
Director of Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
6
SAG.P65
Your Black & Decker angle grinder has been
designed for cutting metal and masonry using the
appropriate type of cutting or grinding disc. It is
also suitable for sanding using a backing pad and
sanding disc.
This tool is intended for consumer use only.
Warning symbols
The following symbols are used in this manual:
dB(A) 89.9
dB(A) 102.9
Know your tool
< 2.5 m/s 2
6

INTENDED USE

SAFETY INSTRUCTIONS

Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Warning! When using mains-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
17-07-2001, 14:51