Maintenance; Protecting The Environment - Black & Decker CD714RE Handbuch

ENGLISH
Selecting the drilling mode
For drilling in masonry, set the drilling mode

selector (4) to the
For drilling in other materials and for screwdriv-

ing, set the drilling mode selector to the posi-
tion.
Setting the drilling depth (fi g. G)
Slacken the side handle (7) by turning the grip

counter clockwise.
Set the depth stop (6) to the desired position. The

maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end
of the depth stop.
Tighten the side handle by turning the grip

clockwise.
Switching on and off
To switch the tool on, press the variable speed

switch (1). The tool speed depends on how far
you press the switch. As a general rule, use
low speeds for large diameter drill bits and high
speeds for smaller diameter drill bits.
For continuous operation, press the lock-on but-

ton (2) and release the variable speed switch.
This option is available only at full speed in both
forward and reverse modes.
To switch the tool off, release the variable speed

switch. To switch the tool off when in continuous
operation, press the variable speed switch again
and release it.
Accessories
The performance of your tool depends on the ac-
cessory used. Black & Decker and Piranha acces-
sories are engineered to high quality standards and
designed to enhance the performance of your tool.
By using these accessories you will get the very
best from your tool.

Maintenance

Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular clean-
ing.
Warning! Before performing any maintenance,
switch off and unplug the tool.
Regularly clean the ventilation slots in your tool

using a soft brush or dry cloth.
Regularly clean the motor housing using a damp

cloth. Do not use any abrasive or solvent-based
cleaner.
Regularly open the chuck and tap it to remove

any dust from the interior (when fi tted).
8
position.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
Safely dispose of the old plug.

Connect the brown lead to the live terminal in

the new plug.
Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth
terminal. Follow the fi tting instructions supplied with
good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recy-
cled and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once they
have reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest au-
thorised repair agent by contacting your local
Black & Decker office at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com.