Werbung
GB
In accordance with essential applicable safety standards of European directives
Class II machine - Double insulation - You don't need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Indoor use only
Wear safety goggles
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
General safety instructions
1.
Keep the work area clean.
•
A cluttered work area may cause accidents.
•
Make sure the work area is well-lit.
2.
Work environment.
Never leave tools in the rain. Do not use tools in damp or wet places. Never use tools near
inflammable liquids or gasses.
3.
Prevent electrical shock.
Keep the power cord away from heat, oil and sharp edges. Avoid skin contact with
exposed parts of the power cord or plug.
4.
Keep children away.
Never allow children or spectators to touch the tools, keep them at a safe distance from
the work area.
5.
Store tools in a safe place.
Tools that are not used must be stored in a dry and locked placed, out of the reach of
children.
6.
Do not force the tool.
The machine will do the job better and safer at the rate for which it was intended. Damage
caused by forcing the tool is not covered by the warranty.
7.
Use the right type of tool.
Do not use low-powered tools for heavy-duty operations. Never use the machine other
than for its intended purpose.
8.
Cable.
Never carry the tool by its cable and do not tug at the cable to pull the plug from the socket.
Keep the cable away from heat, oil and sharp edges.
04
Miljø
For at forhindre beskadigelse under transporten, afleveres apparatet solidt emballeret i
materialer, som for det meste kan genbruges. Benyt derfor venligst mulighederne for genbrug
af emballagen.
Defekte og/eller kasserede elektriske eller elektroniske apparater skal afleveres til
pågældende genbrugsstationer.
Garantibevis
Med hensyn til garantibetingelserne, refereres til garantibeviset, der følger separat med.
CE
KONFORMITETSERKLÆRING (DK)
Vi erklærer herved, udelukkende på eget ansvar, at dette
opfylder følgende standarder eller standardiserede dokumenter:
73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
frå 01-01-2007
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
Vores firmapolitik bygger på løbende forbedring af vores produkter, og vi forbeholder os retten
til at ændre produktspecifikationer uden varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
Ferm
Ferm
BATTERIOPLADER 9A/6V-12V
EN60335-1, EN60335-2-29
i henhold til følgende direktiver:
Quality Manager Ferm Global
DK
J. Lodewijk
73
Werbung
Kapitel
