Factory Reset - Ferroli CRP ZONE Benutzerhandbuch

6.3 Factory reset

IMPORTANT
before resetting the thermostat, proceed with the
pairing as indicated in par. "6.2 RF unpairing from
gateway (Unpairing)" on page 74.
after unpairing the thermostat, proceed with the thermo-
stat factory reset by pressing the button b for at least 5
seconds and then release it.
During the "reset" phase "rtF" will appear on the ther-
mostat display, with "rF" blinking.
• at the end of the procedure, the room temperature
will be displayed on the thermostat display with the
icon blinking.
cod. 3542B150 - Rev 00 - 02/2022
B
fig. 26
75
EN