Balluff BAV MA-OD-00027-01 Montageanleitung Seite 4

BAV MA-OD-00027-01
Smart Reordering System
Installation Guide
The CE Mark verifies
that our products meet the requirements
of the current EU Directive.
About this guide
This guide provides important information for the
installation and connection of the optical wireless sensor
BAV MA-OD-00027-01.
Read this guide and the other applicable documents
completely before installing and operating the product.
Intended use
The optical wireless sensor is a device for monitoring and
transmitting fill level data via LoRaWAN technology.
Flawless function in accordance with the specifications in
the technical data is ensured only when using suitable
original Balluff accessories. Use of any other components
will void the warranty.
Non-approved use is not permitted and will result in the
loss of warranty and liability claims against the
manufacturer.
Reasonably foreseeable misuse
The product is not intended for the following applications
and areas and may not be used there:
– In safety-oriented applications in which personal safety
depends on the device function
– In explosive atmospheres
– In food applications
Construction
45.6
Mounting hole
ToF window
Yellow LED
Button
Red LED
Mounting hole
1 english
Ø 3.5
Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page.
Safety notes
Activities such as installation, connection and startup
may only be carried out by qualified personnel.
Qualified personnel are persons whose technical
training, knowledge and experience as well as knowledge
of the relevant regulations allow them to assess the work
assigned to them, recognize possible hazards and take
appropriate safety measures.
The operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the product will not result in hazards to persons
or equipment.
The product may only be opened to replace the battery. It
must not be modified or altered. If defects and
unresolvable faults occur in the product, take it out of
service and secure against unauthorized use.
Batteries are installed in the product. Attention must be
paid to compliance with the ambient conditions. Heating of
the batteries can lead to a fire.
5 22.5