Jinbei EF-300Bi Anleitung Seite 31

Function Description
Wireless 2 .4 GHz remote control
Briefly press the WiFi settings button [13], the WiFi symbol [23]
flashes. By turning the function button [12], you can now activate or
deactivate the WiFi connection of the EF-300Bi.
Press the WiFi settings button [13] and use the function button [12] to
set the group (GR) and channel (CH) one after the other.
– 32 channels: 00 – 31
– 16 groups: A / B / C / D / E / F / G / H / I / J / L / O / P / Q / S / U
Wireless settings
– 2.4 GHz (b) / 2,4 GHz (p) / Bluetooth®* / Off
– 2.4 GHz (p): EF-RC remote control unit (not included)
Resetting the Bluetooth®* function
Press the Bluetooth®* switch / reset [11] for approx. 2 seconds. The
Bluetooth®* symbol [22] on the LC display flashes, the Bluetooth®*
reset is now in progress. When the Bluetooth®* symbol [22] stops
flashing, the Bluetooth®* reset is complete. You can use the mobile
app for control.
DMX mode
Press the Wifi settings button [13] and turn the function button [12]
until "DMX" appears at the top of the display. Press the Wifi setting
button again, "DMX" will now flash and by turning the function button
you can now set the DMX channel.
31