Jinbei EF-300Bi Anleitung Seite 29

Function Description
Adjusting the Brightness
Turn the function knob [12] to adjust the brightness. The brightness
range can be set between 1% and 100%, "--" means that the LED
permanent light is switched off.
Switching the Percentage / Index Display
Long press the light effect pause / light effect replay button [8] to
switch the percentage / index display.
– Percentage display: 1% – 100%
– Index display: 3.0 – 9.0
Setting the Colour Temperature
Briefly press the function button [12]. The symbol "K" now flashes in
the display. Now you can set the colour temperature with the func-
tion button [12].
– Setting range of the colour temperature: 2,700 K – 6,500 K
Fan control
Press and hold the frequency / fan switch [10], the fan switches on
and the LC display shows the fan symbol [25].
Note: After the fan has been switched off, the brightness is is auto-
matically turned back to 30% of the original brightness.
29