Use Instructions - Frigelux RCU46BE Montageanleitung

The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before
switching back on to allow the coolant fluid to settle.
Before filling your appliance
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure it is working properly
and to allow it to reach the correct temperature.

4. USE INSTRUCTIONS

Temperature setting:
Your refrigerator has one control for regulating the temperature. The temperature control is located at
the top of the fridge.
The first time you put your appliance into operation, set the thermostat to "3" and let it run empty for 4
hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "1" the warmest to "6" the coldest.
Appliance thermostat has 6 settings. The appliance assures that temperature is maintained as long as
it is in operation and that it is used in normal conditions of use. The temperature inside the appliance
can be influenced by many factors : ambient temperature, sun exposure, number of door opening and
amount of food stored... The slight changes in temperature are perfectly normal.

Setting 0: appliance OFF

Settings 1-2: Refrigerator compartment average temperature 6 to 10°C / 0 stars compartment
average temperature -2 to 2°C

Settings 3-4: Refrigerator compartment average temperature 3 to 7°C / 0 stars compartment
average temperature -2 to 2°C

Settings 5-6: Refrigerator compartment average temperature 0 to 4°C / 0 stars compartment
average temperature -2 to 2°C
NOTE:

Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off
the power to the refrigerator.

If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before

Restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start.

If you choose to change the thermostat setting, adjust thermostat control by one numerical
increment at a time. Allow several hours for temperature to stabilize between adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise too much.
 "COLD ZONE" SYMBOLS (Depending on models)
You will find the symbol opposite in your refrigerator. It clearly shows the
location of your appliance's coldest zone: the temperature here is + 4°C or less.
A temperature indicator here enables you to check that your refrigerator is
working correctly.
22