Product Description; Installation Instructions - Frigelux RCU46BE Montageanleitung

2. PRODUCT DESCRIPTION

1. 0 star ice compartment
2. Drip tray
3. shelf
4. bottle racks
5. thermostat
To find out more about your product, consult the online EPREL database. As defined in Commission
Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration appliance is
available on the EPREL Base (European Product Database for energy labeling). This database
enables you to consult the information and technical documentation of your refrigeration appliance.
You can access the EPREL Database by scanning the QR code on the energy label of your appliance
or by going directly to: www.ec.europa.eu and searching the reference of your refrigeration appliance

3. INSTALLATION INSTRUCTIONS

Location
When selecting a location for your appliance you should make sure the floor is flat and firm, and the
room is well ventilated. An average ambient temperature must be observed. This temperature is specific
according to the climatic class of the device:
N-ST climate class: This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 38 °C
Avoid location near a heat source, eg, cooker, boiler or radiator. Also, avoid direct sunlight in out-
buildings or terraces/outside seating areas. If you are placing your appliance in an out-building such as
a garage or annex ensure that it is placed above the damp course, otherwise condensation will occur
on the cabinet. Never place the appliance in a wall recessed or into fitted cabinets or furniture
when it is working, the metal grid at the back may become hot and the sides warm.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to be used as efficiently as possible
by the refrigeration unit.
20