Lipo Battery; Operating Elements; Getting Started; Inserting The Rechargeable Battery - VOLTCRAFT BS-1000T Bedienungsanleitung

c) LiPo battery
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause
an explosion or a fire! Unlike conventional batteries/rechargeable batteries (e.g. AA or AAA type), the
casing of the LiPo rechargeable battery does not consist of a thin sheet but rather a sensitive plastic
film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into
fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable battery
first.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain
amount of heat is generated during charging.

6. Operating elements

See fold-out page.
1 TFT screen
2 ESC button
3 OK button
4 On/off button
5 button
6 button
7 button

7. Getting started

The endoscope must only be used for inspection in powered-down systems. The different camera heads
are metal and can lead to short circuit.
a) Inserting the rechargeable battery
1. Slide the battery compartment cover downwards.
2. Insert the battery and connect the two plugs.
3. Close the battery compartment.
8 button
9 Mini-USB port
10 LED control wheel
11 SD card slot
12 Video output socket
13 DC input socket
14 Attachment thread
25