Rear I/O Panel; Lan Port Led Status Table - MSI MPG B560I GAMING EDGE WIFI Benutzerhandbuch

Rear I/O Panel

DisplayPort
USB 2.0 Type-A

LAN Port LED Status Table

Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek Audio Console > Advanced Settings to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.
2.5 Gbps LAN
USB 3.2 Gen2
(10Gbps) Type-A
USB 2.0 Type-A
USB 3.2 Gen2
(10Gbps) Type-C
Line Out
Wi-Fi Antenna
connectors
Speed LED
Status Description
Off 10 Mbps connection
Green 100/1000 Mbps connection
Orange 2.5 Gbps connection
Line In
Mic In
9
Rear I/O Panel