Emptying The Dust Cup - Shark ICZ300EU-Serie Bedienungsanleitung

OPERATING THE VACUUM
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
For cleaning carpets and hard floors. To activate
brush-roll, step on floor nozzle and tilt handle back.
Use the wand
in Above-Floor
Mode for quick
jobs above
shoulder height.
ABOVE-FLOOR
With pod attached, detach the wand from the
floor nozzle.
SHARK GET ANYWHERE
TECHNOLOGY® WITH WAND
Use the wand in Shark Get Anywhere Technology®
mode for more reach when cleaning above-floor
areas like coving or skirting boards.
NOTE: See previous page for instructions on how to detach the pod, wand, and handle.
52 s h a r kc l e a n . e u
SHARK GET ANYWHERE
TECHNOLOGY®
Use Shark Get Anywhere Technology® to reach
under furniture to clean carpets and hard floors.
Use the handle
in Above-Floor
Mode for quick
jobs o the floor.
ABOVE-FLOOR
With pod attached, detach the handle from the wand.
SHARK GET ANYWHERE
TECHNOLOGY® WITH HANDLE
Use the handle in Shark Get Anywhere Technology®
mode for more detailed cleaning of above-floor
areas like upholstery, window sills or stairs.
MAINTENANCE
IMPORTANT: Remove the battery before performing any maintenance.
To remove, lift the handle on top of the battery and pull up.

EMPTYING THE DUST CUP

To remove Dust Cup, pinch and pull side tabs.
Tilt dust cup away from the vacuum cleaner, then
lift to remove.
Lint
Screen
To remove collected debris from Lint Screen, press
top button and lift handle to open top of dust cup.
Press lower button to open bottom of dust cup.
To reinstall dust cup, place bottom into pod and
then tilt dust cup toward the wand until it clicks
into place.
s h a r kc l e a n . e u 53