Schippmann CS-8-Serie Bedienungsanleitung Seite 33

1. Input A control – attenuates the incoming audio signal at Input A jack
(VCF A) between -∞ dB and 0 dB
2. Input B control – attenuates the incoming audio signal at Input B jack
(VCF B) between -∞ dB and 0 dB
3. Freq control – adjusts the cutoff-frequency for both channels between 2
Hz and 42 kHz
4. Det B control – detunes the cutoff-frequency of VCF B over ±3.6 octaves
(x12 resp. ÷12)
5. Reso control – adjusts the resonance of the phaser (Q-factor) between
zero (1) and self-oscillation (∞) for both filters
6. Det B control – "detunes" the resonance (Q-Faktor) of VCF B about ± 1/3
of the total range
7. Drp A control – adjusts the gain loss (drop) of the filter outputs within the
pass band of the filter with increasing resonance for VCF A
8. Drp B control – adjusts the gain loss (drop) of the filter outputs within the
pass band of the filter with increasing resonance for VCF B
9. Input A jack (input) – audio input VCF A
10. Input B jack (input) – audio input VCF B
11. CV A jack (input) – non inverting CV-input for controlling the cutoff-
frequency VCF A (0.5 V/oct., non-calibrated)
12. CV B jack (input) – non inverting CV-input for controlling the cutoff-
frequency VCF B (0.5 V/oct., non-calibrated)
13. Res A jack (input) – CV-input (±5V) for controlling the resonance of VCF A
14. Res B jack (input) – CV-input (±5V) for controlling the resonance of VCF B
15. 6 db jack (output) – 6 db/oct. audio output VCF A
16. 6 db jack (output) – 6 db/oct. audio output VCF B
17. 12 db jack (output) – 12 db/oct. audio output VCF A
18. 12 db jack (output) – 12 db/oct. audio output VCF B
19. 18 db jack (output) – 18 db/oct. audio output VCF A
20. 18 db jack (output) – 18 db/oct. audio output VCF B
21. 24/36 db jack (output) – 24 or 36 db/oct. audio output VCF A
22. 24/36 db jack (output) – 24 or 36 db/oct. audio output VCF B
23. Slope 2-pos. toggle switch – selects the slope at the output jacks 21 and
22 (24 db/oct. or 36 db/oct.)
CS-8 ol HDH6/VDL6 Rev1.04, Feb. 2015
-11-