Ayce DENVER Gebrauchsanweisung Seite 26

Step 2
- Pull the power cord through the middle tube and
- Subsequently, pull the power cord through the
- Pull the power cord carefully to the top.
Step 3
- Connect the power connector to the socket on
- Secure this connection using the protective lock/
- Slide the connection including the protective box
- Align the heating cap with the upper tube and
screw the middle tube tightly to the lower tube.
upper tube and screw the upper tube tightly to
the middle tube.
the heating cap.
box
back into the upper tube.
screw them to each other with the two M10x12
screws.
Step 4
- Hold the terrace heater firmly and latch the
Step 5
- Anchor the terrace heater using the three foot-
52 | 53
power cord in the groove at the underside of the
foot using the plate and the two self-tapping
screws.
anchors and bolts included in the package.
GB