Lighting The Burner - Camp 4 Cook'n'Fold 706622 Benutzerhandbuch

UK
Camp4 Cook'n'Fold Kartuschenkocher | Camping Stove | 706622
Fig. 5
  
Push Turn
OF F
Click

LIGHTING THE BURNER

The equipment is fitted with a piezo-electric lighter connected to an
ignition electrode (5).
- Push and turn the control knob (1) anti-clockwise until you hear a
click indicating a spark (fig. 5). If the equipment does not light, turn
the control knob (1) to position " " and start the operation again.
- If the equipment still does not light after three attempts push and
turn the control knob (1) to position " " (fig.1) and check that the
cartridge contains gas (sound of liquid sloshing when shaken) before
starting the previous steps again. (if the cartridge is empty, refer to
paragraph 5 - Removing the cartridge).
COOKING
Postion the pan on the carrying supports over the burner and adjust
the gas flow so that the flames do not burn higher than the pan.
The size of the flame can be regulated by turning the control knob (1)
between the full and low flow position.
EXTINGUISHING
Turn the control knob (1) clockwise to the " " OFF position.
Always unscrew the cartridge from the appliance when not in use.
17