Inhaltsverzeichnis
Werbung
How to Use
1.
Mount the Measuring Cup (1) onto the Lid (2).
Secure the Lid onto blender jug and press
down ( FIG 1)
2.
Place the blender jug on the Main body and
rotate anticlockwise (figure 2). See also
3.
Remove the lid or the measuring cup from the
blender jug and place ingredients into the jug.
4.
Place the lid with the measuring cap back onto
the blender jug and rotate the blender
indicated level-1.5 litres.
5.
Using the selector control knob, select the
desired blending speed1, 2 ,3 or PULSE.
6.
The PULSE function remains on as long as the
PULSE button is pressed down, for greater
control when blending, e.g. when chopping
nuts or chocolates, or crushing ice.
7.
Setting 1,2 and 3 will provide continuous
blending until the control knob is turned to the
8.
You can add further ingredients while blending.
For this, remove the measuring cup from the
pouring hole.
9.
After you have completed blending, turn the
Safety locking system
With safety in mind, this blender and coffee mill are
designed with a safety locking system. Unless the
lid and blending jug or coffee mill are positioned
correctly and locked in place, the blender or coffee
mill will not operate.
For correctly assembling the blender, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the blending jug onto the main body with
the handle to the right. The jug is placed correctly
when the arrow on the jug is positioned right
above the open lock on the motor base.
3. Turn the blending jug to the right until you hear a
slight click. The arrows on the motor base and
blending jug should now be aligned with each
other. If this is the case, the blending jug is locked
correctly.
4. Position the lid onto the blender so that the long
holding lip is facing toward you.
5. Turn this holding lip to the right, so that is it
positioned right on top of the jug handle. Now the
blender is ready for use.
For correctly assembling the coffee mill, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the coffee mill onto the main body, turn the
coffee mill to the right until you hear a slight click.
The arrows on the motor base and the milling
bowl should now be aligned with each other. If
this is the case, the coffee mill is locked
correctly.
3. Now the coffee mill is ready for use.
19
Werbung
Inhaltsverzeichnis
