Spare Parts; Return - Endress+Hauser Liquiport 2000 Active cooling Betriebsanleitung

Trouble-shooting
!
30
8.4

Spare parts

Blown-up drawing of the regeneration unit:
Fig. 6: Blown-up drawing of the spare parts
Item Designation
1 Right heating shell
2 Left heating shell
3 Control cpl. +connecting cables
4 Electronics control
5 Fan
6 Temperature fuse
8.5

Return

You should take the following measures before sending the device back to Endress+Hauser, for ex-
ample for repair:
• Always enclose a fully-completed "Dangerous Goods Sheet" with the device. Only then can En-
dress+Hauser transport, test or repair a returned device.
• If necessary, include special handling regulations with the returned product, e.g. a safety datash-
eet in accordance with EN 91/155/EEC.
• Remove all signs of fluids. Pay special attention to the grooves for seals and crevices which could
contain residues. This is particularly important if the substance is hazardous to health, e.g. flam-
mable, toxic, caustic, carcinogenic, etc.
Note!
A master copy of the 'Dangerous Goods Sheet' can be found at the end of the Operating Instruc-
tions.
Liquiport 2000 Active cooling
Order code:
RPT20X-KA
RPT20X-KB
RPT20X-KC
RPT20X-KD
RPT20X-KE
RPT20X-KF
Endress+Hauser