Trouble Shooting - Grizzly Tools ASF 4046 L-Lion Set Originalbetriebsanleitung

GB

Trouble Shooting

Switch off the device, remove the safety key and remove the rechargeable bat-
tery from the device, after all tasks.
Problem
Equipment does not
start
Motor hums, but does
not run, the motor
cuts out
Motor is running, au-
ger is not turning
Abnormal sounds,
clattering or vibrations
No charging process
possible
30
Possible Cause
Battery ( 27) discharged Recharge battery (see „Charging")
Battery ( 27) not
inserted
Battery ( 27) is too hot
Safety key ( 23) not
inserted or not inserted
correctly.
Defective switching ele-
ment ( 2/20/22)
Worn carbon brushes
Defective motor
Overload protection has
been triggered
Auger ( 15) or ejector
chute ( 16) blocked
Auger ( 15) blocked by
snow
V-belt torn or loose
Auger ( 15) damaged
Loose parts
Battery ( 27) is too hot/
cold
Battery ( 27) not insert-
ed correctly in the battery
charger ( 29)
Power plug of the battery
charger ( 29) not in-
serted correctly
Battery contacts contami-
nated
Defective battery (
Fault Fixing
Insert battery (see „Operation")
Allow battery to cool down
Insert safety key and turn it to po-
sition "I".
Repair by customer services
Start the machine again after it
has cooled down
Switch machine off and remove
blockage
Switch machine off and remove
blockage
Repair by customer services
Repair by customer services
Switch off machine and tighten
loose screws and nuts
Allow battery to cool down/warm
up
Insert battery correctly (see
"Charging process")
Insert power plug into the socket
correctly
Clean contacts
Replace battery (see "Spare
27)
parts/Accessories")