Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
guaranteede ............................ 89 dB(A)
measured ...... 86.1 dB(A), K
Vibration (a
) ........ 3.065 m/s
h
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety Information
This equipment may cause seri-
ous injury in the case of improper
use. In order to avoid injury to
people and damage to property,
the following safety information
must be observed and users must
familiarise themselves with all op-
erating parts.
Symbols and icons
= 3.13 dB
WA
Symbols on the device:
; K= 1.5 m/s
2
2
Caution!
Read the operating instruc-
tions carefully.
Risk of injury from parts
being thrown up.
Any persons in the vicin-
ity must be kept out of the
danger zone.
Caution! Avoid injury from
rotating turbine - Keep
hands, feet and clothing
away.
Attention! Shut off motor
before unclogging dis-
charge chute.
Wear eye and ear
protection.
Switch off the device, re-
move the safety key and
remove the rechargeable
battery from the device, af-
ter all tasks.
Remove the battery before
servicing it.
Caution!
Do not expose the unit to
rain.
Ejector chute
slewing range
GB
21
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
