Before First Use - Marta MT-1988 Bedienungsanleitung

Do not cover the steam vent and the lid while the Multicooker is operating. It may cause malfunction in multicooker work,
D
While you are cooking the lid and outer surface of the Multicooker might get hot. Handle or move Multicooker with care. The accessible surfaces may become hot when the appliance is in operation.
When you open the multicooker lid , wait while steam goes out and after that you may get closer.
While cooking avoid using sharp utensils not to damage the Multicooker inner surface. Please use spoon which comes with the Multicooker. You may use also wooden, plastic or silicone utensils.
Beware of the hot steam that comes out of the steam vent during cooking. Keep hands and face away from Multicooker when you open it to avoid being burnt by hot steam.
If any unusual sounds, odour or any other disruption happens, switch the multicooker off. Make sure that there are no any objects or liquids between the pot and heating plate. If malfunction reason
Let the multicooker pot cool before washing otherwise the inner coating could be damaged.

BEFORE FIRST USE

Please unpack your appliance. Remove all packing materials. Remove all stickers from the lid and housing.
Please check if all parts of the Multicooker are in a set. Please check that every part is not damaged.
Wash all removable parts in warm soapy water. Rinse and dry all parts thoroughly. Wipe the stainless steel outer housing with a clean damp cloth.
NEVER immerse the outer housing in water or any other liquid. Only the removable cooking pot is dishwasher safe.
DEFAULT PROGRAMS
Press Menu button to chose the program which you need and start it with the Start button
TWO-PHASE PROGRAMS
There are two-phase automatic programs (Pilaw
Each of phases has own cooking time/temperature settings for proper result of each stage of cooking process.
CHEF
Chef mode is a mode of manual adjustment of both cooking time and temperature while program is running. Press
Then press and hold button
food or liquids or when it is connected to electricity network.
ody.
and Bread
(Temperature), to set cooking temperature which you need and press button Start
ange sounds and cause multicooker malfunction.
Time is 60 minutes.
) for easier operation and better results. When first phase is over; beep alarm sounds.
20
MT-1988/1989
(hours) and (minutes) to set cooking time.
to confirm settings which you adjusted.