Viewing Of Setting; Using Of The Transitional Timer (Party Button); Control Elements Lock - Mandik Rdg160T Bedienungsanleitung

6. As soon as the block is/is not inserted into
the seventh day, all chosen week days
start blinking. Confirm the setting by the
button ok and thus you pass to setting
of another time block.

Viewing of setting

1. Push twice the programming button
(middle one) in order to enter in time
block setting, this symbol shows
2. Turn the wheel to subsequently view all
8 time blocks.

Using of the transitional timer (party button)

The transitional timer is used to temporary
prolong the comfort or economy mode under
extraordinary presence/absence .
Room thermostat in the automatic operation
mode .
Push the left button for max . 3 s and at the
same time turn the when clockwise to prolong

Control elements lock

Push and keep the right button for 3 s to lock or unlock control elements .
In order to save your setting do not forget to
push ok following the step 6 before you press
the button Esc to exit the programming mode .
3. Press the button Esc
.
the comfort mode, display
anticlockwise to prolong the economy mode,
display
be set by 9:30 hrs max, following the expiration
of the set time the regulator returns back to
the standard operation according to the time
program .
®
MANDÍK, a. s., Dobříšská 550, 267 24 Hostomice | www.mandik.cz
standard operation.
0...-9:30 . Both prolongation can
to return to the
0...+9:30 or
23
|
EN