Setting Of The Rdg 160 T Room Thermostat; Current Time And Week Day Setting; Time Program Setting (Change) - Mandik Rdg160T Bedienungsanleitung

SETTING OF THE RDG 160 T ROOM
EN
THERMOSTAT

Current time and week day setting

Press the button of time program setting (mid-
dle one), the display shows the symbol
confirm with the right button
showing the time start blinking, turn the wheel
and set the current time .
In order to change the time display format
from 24 hours format to the 12 hours one and
vice versa override the value 23:59, i .e . 00:00,
when setting the time .
Confirm the set time with right button
week day indicator starts blinking, set the cur-
rent day by turning the wheel anticlockwise .

Time program setting (change)

The room thermostat includes 8 programmable time blocks that can be assigned to one or more
week days .
1. Push twice the programming button
(middle one) in order to enter in time
block setting, this symbol shows
2. Turn the wheel to choose the time block
A1...A8 you wish to set and confirm with
right button
3. Turn the wheel and set the comfort mode
start
button
22
|
.
and confirm with the right
.
Confirm the set day with right button
,
Above the left button, the symbol
. Numbers shown, by pressing the left button you exit the
programming mode .
Note: In case of power supply breach the time
starts blinking to indicate the power supply
failure . The time program continues with origi-
, the
nal time before the power supply failure .
4. Turn the wheel to set the end of the comfort
= start of the attenuation mode
. confirm with right button
5. Symbols of week day 1, ok
starts blinking. Push the button ok
order to insert or Esc
time block in that day.
.
(Esc) is
and
.
and Esc
in
not to insert the
MMS control box