Chapter -3: Using Your Fridge Freezer; Control Panel - Sharp SJ-BE237E00X-EU Bedienungsanleitung

CHAPTER -3: USING YOUR FRIDGE FREEZER

Control panel

Temperature set button
Temperature set button
This button allows setting temperature of the fridge. In order to set values for fridge partition, press this button. Use this
button also to activate Super Cooling mode.
Alarm light
In case of a problem within the fridge, the alarm led will release red light
Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super cooling light comes on.
• Super cooling led will light during this mode.
• For optimal appliance performance in maximum cooling capacity, set the appliance to active Super Cooling
mode 5 hours before you put the fresh food into the fridge.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will be restored from MAX.
Note: "Super cooling" mode will be automatically cancelled after 5 hours.
Temperature Settings
• The initial temperature of the Setting Display is Middle temperature indicator.
• Press temperature set button once.
• Every time you press the button, the setting temperature will decrease.
• If you press temperature set button until super cooling symbol is displayed on your fridge settings display and
you do not press any button within the following 3 seconds, Super cooling will blink.
• If you keep on pressing, it will restart from last value.
It ensures that the temperature settings in the cooling and freezing compartments of your refrigerator are performed
automatically. It may be set to any value ranging from MIN to MAX. As you press temperature set button from MIN
to MAX, the temperature decreases. To save energy in winter months, operate your refrigerator in a lower position.
Alarm
indicator led
super
Symbol of
Super Cooling Mode
Temperature indicator
EN -7-