CAUTION
The refrigerator must be set to "0" (OFF) before connection
to a DC power source.
6.2.1 Connection to 12V DC cigarette lighter socket
Insert the square moulded DC plug into the terminal housing on
the refrigerator.
The other end of the cable has a cigarette lighter plug.
Ensure that the cigarette lighter socket is clean and free from dust,
corrosion or other foreign objects.
To change the plug head type, refer to (Fig.1) below.
For American
DC12V ONLY
Plug
Cover
For European built vehicles
(Fig.1)
Insert the plug securely into the cigarette lighter socket to prevent
it from coming loose. Loose connection may result in overheating
which will damage the cigarette lighter socket.
First, set the temperature setting knob to "0" (OFF). Then, set it
anywhere between 1 and 5. Turn the temperature setting knob a
required setting.
To stop the refrigerator, remove the cigarette lighter plug from the
socket.
CAUTION
The center terminal of the plug must be connected to the
positive line while the side contacts to the negative or earth.
If reversely connected, the fuse in the plug will blow and the
EN
- 13 -