Safety Information For Working On The Electrics; Behaviour In Emergencies - Nordforest 46-113 Bedienungsanleitung

All manuals and user guides at all-guides.com
46-113, 46-114 | 11.2018
›
Erect the wood splitter on a level, horizontal and firm surface.
›
Ensure there is sufficient lighting in the workplace.
›
Ensure that you have a level area with safe footing and with
sufficient freedom of movement.

Safety information for working on the electrics

Any work on or modifications to the electrical equipment of the
machine must be performed by our specialist personnel exclusively. The
machine shall only be opened by our service personnel.
Damage to the insulation or individual components may pose a danger
of death. Touching live parts results in a direct risk of death.
›
Check the machine for defects such as loose connections or
damage to the insulation (for intervals and maintenance activities,
see "Cleaning and maintenance" on page 57).
›
In case of defects to the electrical equipment, switch off the power
supply immediately and contact the specialist dealer.
All live parts of the wood splitter are insulated against contact or are
covered with fixed, securely fastened safety guards that can only be
removed with tools.
›
Never remove fixed, securely fastened cladding. There is a risk of
injury due to electric shock.
Moisture can cause short circuits.
›
Keep moisture away from live parts.
›
Never work in the rain and never leave the wood splitter out in the
rain.

Behaviour in emergencies

If, for example, there is a direct risk of personal injuries or damage to
the wood splitter due to malfunctions or hazardous situations:
›
Take the machine out of operation immediately with the
EMERGENCY STOP switch.
Safety instructions
8 t wood splitter 43