Offgridtec PSI-PRO 12/2000 Benutzerhandbuch Seite 36

4 Installation
4.1 Hints
• Read all installation instructions carefully before installing
• Observe all safety regulations of the battery used. Please wear an eyeand handprotection
when installing on a lead-acid battery.
• Keep theconnection cable away from metal objects to avoid short circuit of the battery
and voltage converter
• Loose power connections and corroded wires can cause high heat, melt the wire
insulation, burn surrounding materials or even causeafire. Set fixed connections and
secure the cables best with cable clamps.
• The DC input voltage must strictly follow the parameter table. Too high or too low a DC
input voltage affects the normal operation of the inverter and even damages it. The battery
voltage must be less than 20V for the 12Vvariants and less than 40V for the 24V
variants,
• Select the connection cables according to the specified table
• Avoid direct sunlight and moisturewhen installing the inverter outdoors.
• Do not open or touch the internal component immediately after you turn off the power
button. We snare, min. wait 10 minutes so that the internal capacitors can fully
discharge.
• Do not install the inverter in a harsh environment such as damp, greasy, flammable,
explosive or dust accumulation.
• The Ac output is of high voltage, do not touch the wiring connection to avoid electric shock.
• To avoid injury, do not touch the fan while it is working.
General information
Offgridtec GmbH
Im Gewerbepark 11
84307 Eggenfelden
WEEE-Reg.-Nr. DE37551 136
Contact
Tel: +49 8721 91994-00
Email: info@offgridtec.com
Web: www.offgridtec.com
GFR: Christian & Martin Krannich
Offgridtec PSI-PRO Inverter
Konto Sparkasse Rottal-Inn
Konto: 10188985
BLZ: 74351430
IBAN: DE69743514300010188985
BIC: BYLADEM1EGF (Eggenfelden)
4 Installation
Sitz und Amtsgericht
HRB: 9179 Registergericht Landshut
Steuernummer: 141/134/30045
Ust-IdNr: DE2871 1 1500
Gerichtsstand: Mühldorf am Inn