Setting Up The Voip Communication; Option 1: Setting Up The Youvi Door Station Module - PEAKnx 2N IP Verso Kurzanleitung

3 Setting up the VoIP communication

3 Setting up the VoIP communication

3.1 Option 1: Setting up the YOUVI door station module

Via the door station module it is possible to integrate SIP intercom systems into the visualiza-
tion. To do this, proceed as follows:
1. Open the YOUVI Configuration Dashboard page via the desktop shortcut or the green
house in the taskbar.
− You can also reach the configuration page on your browser, as long as you are in the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
browser:
− http://x.x.x.x:31228, Where x.x.x.x must be replaced by the local IP address of your
PEAKnx touch panel. This is shown to you in the server overview:
26