Amica PB 4V 0 Serie Gebrauchsanweisung Seite 29

INSTALLATION
Installing the hob in worktop opening PBP4**
• Use four "A" brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown
on figure 2 and 3. To properly secure hob in 28 mm thick worktop, use four 15x15x50 mm
wooden blocks in addition to "A" brackets. Fit the hob into worktop opening as shown on
figure 4 and 5.
• Check if adhesive seal is properly applied to the hob's flange.
• Loosely attach fixing brackets to the bottom of the hob
• Remove dust from the worktop, insert hob into the opening and press in firmly,
• Position fixing brackets perpendicularly to the hob's edge and tighten firmly.
2
5
1
1. worktop
2. screw
3. fixing bracket
4. hob
5. seal
3
All manuals and user guides at all-guides.com
4
2 3
560
320
466
4
1. worktop
2. screw
3. fixing bracket
4. hob
5. seal
6. wooden block
5
29
5 4
15
1 6 2 3
560
270 50
416 50