Midea BOM90D2IX Bedienungsanleitung Seite 119

5. Audible warning time adjustment
This function can be used to receive audible warning at the completion of the ajusted
time period.
• Press " " button to select the minute minder function. The relevant "
symbol will flash.
• Use " + " " - " button to adjust minute minder. ( Refer to the instructions for setting
the correct time of day.) Press "
to light continuously. When the "
audible warning time adjustment is done.
• When the time is up, the timer gives an audible warning and the "
begins to flash on the screen. Press any button less than 3 seconds, it will stop the
audible warning and the "
time adjustment is for warning purposes only.
Press " " and "+" together for more than 3 seconds to enter standby mode if oven
will not be used.
6. Semi-automatic programming according to cooking period
This function is used to cook in the desired time range,The food to be cooked are put
into the oven.
The oven is adjustment to the desired cooking function and temperature degree. The
maximum setting of cooking period is 10 hours.
• Press " " button until you see " Dur " on the timer screen.(Before setting cooking
period.)
• Use " + " " - " button to adjust cooking period for the food you wish to cook.
(Refer to the instructions for setting the correct time of day.) Press "
confirm the day s time will appear on the screen and the symbols " A " "
light on the screen. While doing this the oven will also start to operate.
• At the completion of the set duration, the timer will stop the oven and give an
audible warning. Also, the symbol "A" will begin to flash on the screen. After
bringing the cooking function and oven temperature knob to " 0 " position. Pressing
any button less than 3 seconds it will stop the audible warning. Pressing "
more than 3 seconds set the oven to Manual mode again to use the oven.
7. Semi-automatic programming accroding to finishing time
This function is used to cook according to the desired finishing time. The food to be
cooked is put into the oven. The oven is adjusted to the desired cooking function and
temperature degree.
• Press " " button until you see " End " on the timer screen. (Before setting finished
time).
• Use " + " " - " button to adjust finishing time. (Refer to the instructions for setting
the correct time of day.)
• Press " " button to confirm, the day 's time will appear on the screen and the
symbols " A " "
to operate.
• At the completion of the set duration, the timer will stop the oven and give an
audible warning. Also, the symbol " A " will begin to flash on the screen. After
bringing the cooking function and oven temperature knob to " 0 " position. Pressing
" button to confirm, the "
" symbol begins to light continuously, the
" symbol disappears on the screen. Audible warning
" will light on the screen. While doing this, the oven will also start
" " . "
" symbol will begin
" symbol
" button to
" will
" for
 EN-10 