Built-In Installation And Repair; Bulb Replacement - Midea BOM90D2IX Bedienungsanleitung

BUILT-IN INSTALLATION AND REPAIR

BULB REPLACEMENT

For replacement, process as follows:
• Disconnect power from the mains outlet or switch off the
circuit breaker of the unit's mains outlet.
• Unscrew the glass lamp cover by turning it counter-clockwise
(note, it may be stiff) and replace the bulb with a new one of
the same type.
• Screw the glass lamp cover back in place.
Note
Only use 25-40W/220V-240V , T300°C halogen lamps.
SECURING THE OVEN TO THE CABINET
• Fit oven into the cabinet recess.
• Open the oven door.
• Secure the oven to the kitchen cabinet with two distance
holders " A " which fit the holes in the oven frame and fit the
two screws " B ".
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven's center
temperature is over 75 degree, the cooling fan will continue working for 15 minutes. Or
when the oven's center temperature becomes lower than 75 degree, the cooling fan
will stop in advance.
2
Ventilating
openings
 EN-6 