Hazet-Werk 4934-3478/11 Betriebsanleitung Seite 16

3
4930­1
• Put the thrust washer D onto the spindle nut 4930­2.
• Put the threaded spindle 4930­1 through the thrust plate E.
• Put the threaded spindle 4930­1 with the thrust plate E and the 4 inserted thrust pins F from
outside onto the the wheel bearing / wheel hub in a way that the thrust pins F rest on the recess
b of the thrust ring B. At the same time insert the thrust washer D with the spindle nut 4930­2
into the interior of the bearing housing and screw the threaded spindle 4930­1 into the spindle
nut 4930­2.
• Once the force closure has been reached, the spindle nut 4930­2 has to be retained with an
assembly tool for nuts and screws (e.g. box wrench).
• After dismounting the wheel hub bearing, dismount the mounted parts!
16
c
Design and Function
All manuals and user guides at all-guides.com
Cylinder head screw
c
F
E
During operation do not reach into extractor device!
Lubricate the threaded spindle 4930-1 before each use!
M 8 x 35
B
4930­2
D