PNI Escort HP 8500 Benutzerhandbuch Seite 14

How to change the standard
• Turn off the device.
• Press and hold the PTT and CH DN SCAN keys simultaneously while
restarting the device (long press the POWER key).
• The set rule will be displayed on the screen.
Note: From the factory, the CB radio comes preset to EU standard.
• Use the CH UP SCAN or CH DN SCAN keys to change the standard
(band)
Note: Refer to the table of bands and frequencies at the end of the manual.
Reset
• Turn off the device.
• Press and hold the VOL + and CH UP SCAN keys simultaneously while
restarting the device.
• The device returns to the factory defaults.
User manual 14