Device-Specific Safety Notices - MAXXMEE 02112 Originalbetriebsanleitung

EN
6) Service
i) Have the power tool repaired only by
a qualified expert using only genuine
replacement parts. This will ensure
that the safety of the power tool is
maintained.
j) Never service damaged batteries.
The servicing of batteries should only
be carried out by the manufacturer or
authorised service centres.
7) Safety Notices for Screwdrivers
a) Hold the power tool by the insulat-
ed handle surfaces when carrying
out work in which the screw may hit
hidden power cables. Contact of the
screw with a live cable may also apply
a voltage to metallic parts of the de-
vice and result in an electric shock.
b) Hold the power tool securely. High
reaction torques can be produced
for a short time when tightening and
undoing screws.
c) Secure the workpiece. A workpiece
which is firmly held in place by clamp-
ing devices or a vice is held more
securely than it is with your hand.
d) Wait until the power tool has come
to a standstill before putting it down.
The bit which is used may get caught
and lead to a loss of control over the
power tool.
e) Before doing any work on the power
tool (e.g. maintenance, change of
tool etc.) and when transporting
and storing it, move the rotation
22
02112_Inlay_145x165_de-en-fr-nl_V1.indb 22 02112_Inlay_145x165_de-en-fr-nl_V1.indb 22
direction changeover switch to the
middle position. There is a danger of
injury if the On/Off switch is operated
accidentally.
f) Protect the power tool from heat,
e.g. also from persistent sunlight,
fire, water and moisture. There is a
risk of explosion.
DEVICE-SPECIFIC SAFETY
NOTICES
■
Keep children and animals away from
the packaging material. There is a
danger of suffocation.
■
This device is not intended to be used
by people (including children) with re-
duced sensory or mental abilities or a
lack of experience and/or knowledge.
Follow country-specific or regional and
local regulations which may include
age specifications for devices of this
type.
■
Children must be supervised to ensure
that they do not play with the device.
■
Cleaning and user maintenance
must not be carried out by children.
Otherwise there is the risk of incorrect
operation and injuries.
■
If the connecting cable of this device
is damaged, it must be replaced by
the manufacturer or its customer
service department or a similarly
qualified person in order to avoid any
hazards.
01.12.2020 14:48:58 01.12.2020 14:48:58