Installation - BOMANN SBS 7323 IX Bedienungsanleitung, Garantie

Delivery scope Delivery scope Delivery scope Delivery scope
Fridge: Fridge: Fridge: Fridge:
5x glass shelf, 1x chrome bottle rack,
2x vegetable box, 5x door storage rack, 2x egg tray
Freezer: Freezer:
Freezer: Freezer: 5x glass shelf, 2x freezing box, 5x door
storage rack, 1x ice-cube tray
for levelling the appliance doors
1x wrench

Installation

Installation Installation Installation
Conditions for the installation location Condition s for the installation location
Condition Condition s for the installation location s for the installation location
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
- Gap to the back approx. 5 cm and to the side
walls each approx. 10 cm;
- Place the appliance so that the appliance door
can open without being impeded.
• Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the "EU Product Data Sheet" or to the rating la-
bel located in the interior or on the appliance rear.
• Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
• Avoid the installation: Avoid the installation:
Avoid the installation: Avoid the installation:
- near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
All manuals and user guides at all-guides.com
Levelling the appliances doors Levelling the appliances doors Levelling the appliances doors Levelling the appliances doors
Open the door, loosen the locknut (2) with the sup-
plied wrench (3)..
..
nut (1) counterclockwise
..
nut (1) clock
Once the doors are aligned, retighten the locknut (2).
Fixing the door handles Fixing the door handles Fixing the door handles Fixing the door handles
Electrical connection Electrical Electrical Electrical
• The installation to the mains supply must conform
• Improper connection may cause to an electric
• Do not modify the appliance plug. If the plug does
• The accessibility of the power plug must be en-
• Make sure that the voltage supply matches the
• Connect the mains cable to a properly installed
19
If the doors are uneven and do
not close parallel to each oth-
er, the refrigerator door must
be aligned. Maximum toler-
ance compensation ance compensation ance compensation ance compensation is 5 mm!
if the refrigerator door is too low
counterclockwise to raise the door.
counterclockwise counterclockwise
if the refrigerator door is too high
clock clockwise clock wise wise to lower the door. wise
Check the tightness of the door handles.
If necessary, tighten the door handle
screws with a hexagonal screwdriver.
connection connection connection
WARNING WARNING WARNING WARNING: : : :
to the local standards and regulations.
shock! shock shock shock
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
sured to disconnect the appliance from the power
supply in case of emergency.
specifications on the rating label before connect-
ing.
and earthed wall outlet.
Maximum toler- Maximum toler- Maximum toler-
is 5 mm! is 5 mm! is 5 mm!
, turn the adjusting
, turn the adjusting
electric electric electric