Start & Ride; First Ride - Hikerboy FOXTROT Benutzerhandbuch

START & RIDE
8.
START AND DISPLAY PANEL
Long press the "M" button to start the electric scooter. (The scooter will automatically turn off after 5 minutes of non-use.)
ACCELERATOR
Press the throttle grip to accelerate and control speed. The speed is between 1 and 25 km / h. The system has an
integrated cruise control function. If you hold the trigger for more than 6 seconds, the speed will remain constant even
if you let go of the trigger. To stop the cruise control you can accelerate or brake.
BRAKES
The left brake handle controls front wheel braking and the right brake handle controls the rear wheel. The brake handle
also controls the brake light, which comes on each time the brake is activated.
(Note: Do not brake at high speed or on a wet road to avoid skidding).
HEADLIGHT AND BELL
The left handle is fitted with a bell, to alert other users when you pass them.
To turn on the front light, press the "M" button twice.
FIRST USE
9.
RIDING OPERATION
➔ Check all fasteners before first use.
➔ Choose a large, flat space.
➔ Unfold and put the scooter on the ground. Adjust the height of the T-shaped tube. Turn on the scooter.
➔ To ensure user safety, the scooter has an assisted starting system.
➔ First, place one foot on the pedal while keeping the other on the ground to keep your balance. Then gently pull up
on the throttle grip.
➔ Then the scooter moves forward and you have to put your other leg on the board. If you pull back on the throttle,
the speed will be faster.
28