Battery & Charger - Hikerboy FOXTROT Benutzerhandbuch

6. BATTERY & CHARGER
CHARGING THE BATTERY FROM THE SCOOTER
• Lift the rubber cover over the charging port. Connect the
charger to the outlet to recharge the battery. (Figure 4.1)
Note: Immediately charge the scooter before your first use. Make
sure that the mains voltage is compatible. (AC100V-240V).
REMOVE & CHARGE THE BATTERY
• Unlock the platform of the scooter on each side by turning only one turn with
the key provided. (A-1) Lift up the tray, to release it.
• Disconnect the battery as shown in picture B.
• Move the charger to the side and close the port with the cover C.
• Remove the battery using the handle D.
• Open the top cover of the battery and connect the battery with charger E.
Note: Immediately charge the scooter before your first use. Make sure that the
mains voltage is compatible. (AC100V-240V).
24