Panasonic EY74A2 Bedienungsanleitung Seite 13

Indicator
3 lamps
illuminated
2 lamps
illuminated
One lamp
illuminated
3 lamps
flashing
This battery level function is only a guide
and indication may change due to the
condition of the battery or ambient
temperature.
Excessive (complete) discharging of
lithium ion batteries shortens their service
life dramatically. The driver includes a
battery protection feature designed to
prevent excessive discharging of the
battery pack.
EY74A2_EU.indb 13
Bit-locking Function
Battery status
1. With the trigger switch not depressed
Fully charged
or high charge
level
Approx. 60%
2. This feature is handy for tightening
remaining
Low level
- Will require
charging soon
Empty
- Immediate
charging
required
Changing the Belt Hook Location
Side [Fig.8]
The belt hook can be attached to either
side of the unit.
1. Removing the hook
2. Attaching the hook to the other side
- 13 -
and a screwdriver bit locked in place,
the tool can be used as a manual
screwdriver (up to 22.6 N•m,
230 kgf•cm, 199 in•lbs).
There will be a little play in the chuck,
but this is not a malfunction.
screws that require more torque than
the maximum torque of the driver
(position on the clutch), for confirming
the tightness of a screw or to loosen an
extremely tight screw.
(1) Remove the nut.
(2) Draw out the hook.
(1) Insert the hook in the other side.
(2) Tighten the nut fully so that it
securely fastened.
EN
2015/10/16 13:51:23