Page EN-14
Cleaning and maintenance
Cleaning and maintenance
WARNING
Risk of injury!
The blades of the blend-
■
er are very sharp. Be care-
ful when working with the
blade assembly.
Risk of short circuit!
Any water or other liquids
which penetrate the housing
may cause short-circuiting.
Never immerse the motor
■
block of the blender in wa-
ter or other liquids.
Make sure that no water or
■
other liquids penetrate the
motor block.
NOTICE
Risk of damage!
Improper use of the blender
can damage it.
Do not use any aggressive
■
cleaners, brushes with met-
al or nylon bristles or sharp
or metallic cleaning utensils
such as knives, hard scrap-
ers, etc. They could damage
the surfaces.
Never place the motor
■
block of the blender in the
dishwasher. This would de-
stroy it.
Clean the smoothie cup,
■
the drinks cup and the lid
at a water temperature of
max. 70 °C.
The blender and the drinks cup
must be cleaned after every use.
Please note: acidic foods and
fruit may discolour plastic. These
discolourations do not constitute
damage.
1. Before cleaning, pull the mains
plug out of the socket.
2. Let the blender cool down
completely.
3. Dismantle the blender.
4. Wipe the motor block (7) with a
lightly moistened cloth.
5. Clean the smoothie cup, drinks
cup and the lid with a little
washing-up liquid and warm
water, or place in the upper
rack of the dishwasher (up to a
maximum of 70 °C).
6. Then wipe all parts completely
dry.
7. Reassemble the blender.