Adler europe AD 7913 Bedienungsanweisung Seite 4

16. Do not block the outlet grille and rear grill .
17. After finished using, release the water from the water tank.
18. If the device is not used for long periods of time, unplug it from the network.
19. Do not move the device when the water tank is filled with water.
20. Do not place any objects on the device.
21. The devices can be used only with efficiently working ventilation.
DEVICE DESCRIPTION
1.Cover of top water tank
4. Handle
7. Water inlet with stopper
10. Water tank
USING THE APPLIANCE
A noticeable reduction in the temperature of the outlet air occurs after putting into the top water (2) tank one or both plastic containers
(11) attached to the product. Plastic containers (11) should be previously filled with water in ¾ high and frozen in the freezer. It is
recommended to fill the tank (10) with cold tap water.
1. After unpacking the device from the packaging, mount the wheels and set the air cooler on a dry, flat surface, then connect the power
plug.
2. Open the cover of top water tank (1) and pour in the water to water inlet with stopper (7). Be careful not to exceed the maximum level
on water level indicator (6).
3. Turn on the device with the "LOW", "MID" or "HIGH" button on the control panel, thus determining the airflow rate:
"LOW" - slow fan speed
"MID" - medium fan speed
"HIGH" - fast fan speed
4. The "SWING" button causes oscillation of vertical blinds, which ensure even distribution of cooled air streams. The horizontal blinds
do not move automatically - you can move them manually.
5. The "COOL" button reduces the temperature of the exhaust air by activating the water pump. Two plastic containers (11) are included
in the set. To use plastic containers placed them in the freezer for about a day first. Then insert one or both of them into top water tank
(2. The "COOL" function also moisturizes the air.
6. During operation of the device, periodically check the water level for refilling the tank. Do not activate the "COOL" function if the water
level is lower than the minimum level.
7. To end the operation of the device, press the "OFF" button on the control panel.
CLEANING AND MAINTENANCE
It is recommended to clean the device with a soft, dry cloth. Do not use any chemical solvents as they may permanently damage or
deform the surface. If the device will not be used for three months or longer, remove the batteries from the remote control. Pour water
out of the tank before storage by opening the drain plug (8). Dry the device to avoid moisture damage. Set the "COOL" button to the
highest fan speed, the device should work for about 10 minutes to dry the internal filter (5).
TECHNICAL DATA
Supply voltage: 220-240 V ~ 50/60 Hz
Power: 65W
Maximum power: 350W
Capacity: 12L
Water consumption: 1-2 liters / hour
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
All manuals and user guides at all-guides.com
2. Top water tank
5. Internal filter
8. Drain plug
12 liters
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
3. Bobbin winder bracket
6. Water level indicator
9. Wheels
11. Two containers for water freezing
Device is made in class I of insulation.
Device is compliant with EU directives:
Low voltage directive (LVD)
Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
DEUTSCH
4