OcCre ISTANBUL Bastelanleitung Seite 7

PHOTOS 68 & 69. Make up and glue the parts (130 & 131), with the template as a guide and using super glue.
Cut the parts (135) to size and drill a hole in each end and then make up the parts (132, 133, 134 & 135). Attach the parts (136)
at the ends of the parts (135) and fit the axis (136). Paint the assembly black and red, as shown.
PHOTO 70. Sand down the window frames (138) and stain them the colour of walnut wood. Cut the window panes (139) to size
and glue them to the interior side. For this operation use a transparent contact adhesive. Glue the parts (140) to the top corners.
PHOTOS 71 & 72. Adjust and glue the finishing piece (141) around the edges of the tram roof and then paint it white. Insert and
glue the windows into place and do the same with the trolley. Glue the parts (142 & 143) together and then paint them a light
grey colour. Stain the parts (25a) a walnut wood colour. Cut to size and glue the windows (145 & 146) into place. Adapt and
attach the finishing strip (144) and then paint it white.
PHOTO 73. Stick the decals (147 & 151) onto both sides of the tram. Cut the strips (148, 149 & 150) to size, paint them red and
then glue them in place using super glue.
PHOTO 74. Bend and glue the parts (152) into place and then insert and glue the part (153) to the front of the tram. Adapt and
glue the part (154) and then glue the decal (155) onto it.
PHOTO 75. Paint the parts (156, 157 & 158) a gold colour and then insert them into the holes, as shown. Glue the lens (159)
into place using super glue.
PHOTO 76. Make up the parts (161), glue them to the parts (160) and then paint them white and red as shown. Insert and
attach these parts to the tram.
PHOTO 77. Bend the parts (162) to shape and paint them black and glue them to the base of the chassis.
PHOTOS 78 & 79. Paint the parts (163 & 164) and glue them in place as shown. Now make up two assemblies, both the same,
using the parts (165, 166 & 167), paint them black and glue them to the roofs.
PHOTO 80. Paint the parts (168, 169 & 170). Glue one of the grilles (168) onto the side of the platform and, on the other side,
one of the grilles (169). Now do the same at the other end of the tram, but changing the position. Make a hole and attach the
part (170).
PHOTO 81. Bend the parts (172) into shape, glue them to the part (171) and then paint this assembly a light grey colour. Finally
stick the decal (173) onto the front surface and glue the assembly centred on the roof, as shown. Paint the parts (174) and glue
them into place. Using the parts (175 & 176) make up six assemblies, all the same. Paint two of them black and glue one of
these to each side of the tram, as shown. Check out the following photos before proceeding.
PHOTO 82. Make up four rear-view mirrors using the parts (177, 178 & 179). As you will observe, these must be attached to
both sides of the tram and must be mounted symmetrically. Paint them and glue them into place as shown.
PHOTOS 83 & 84. Glue the other four assemblies, made up using the parts (175 & 176) and attach them to the roof of the tram,
as shown. Paint them a light grey colour. Glue one end of the thread (180) to a corner of the window, as shown, and then pass
the thread through the metal parts, as indicated, through the trolley hook and then glue the other end of the thread to the
window at the other end of the tram.
We have designed this model with one single goal in mind: so that you will enjoy yourself while building a beautiful reproduction
of a magnificent scaled model.
If we have achieved this, then our mission is complete.
Thank you.
OCCRE