Step 4.10 : Use the parts from step 4.9, the slatted base 11, the wood screws G and cover caps J.
Place the slatted base (11) on the supports of the cross bars (1). Push the wood screws (G) through the holes in the base
and tighten in the supports. Stick the cover caps (J) on the drillings with the minifi xes.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
MY HOME 0101D001
T
0032 9 380 80 95
33
Step 4.9 : Use the assembled bed
and the cover caps F
Push the cover caps (F) onto the
maxifi xes of the superstructure.
www.quax.eu - E
E
info@quax.eu