Philips AZ-2030 Bedienungsanleitung Seite 10

All manuals and user guides at all-guides.com
CD PLAYER
Programming track numbers
In the STOP position, select and store your CD tracks in the desired
sequence. If you like, store any track more than once.
Up to 20 tracks can be stored in the memory.
1. Use the SEARCH ∞ or § on the set, (for AZ2035 model only:
or on the remote control ¡ or ™) to select your desired track
number.
2. Press PROG.
™ Display:
and the selected track number.
PROGRAM
appears briefly.
™ If you attempt to programme without first selecting a track
number, or
3. Repeat steps 1-2 to select and store all desired tracks.
™
is displayed if you attempt to programme more than
20 tracks.
4. To start playback of your CD program, press PLAY 2;
(for AZ2035 model only: or on the remote control 2;).
Reviewing the programme
In the STOP position or during playback, press and hold down
PROG for a while until the display shows all your stored track
numbers in sequence.
Erasing a programme
You can erase the programme by:
– pressing STOP 9 twice in the STOP position or during playback.
• scrolls across the display briefly and
disappears.
– selecting another source: TAPE or TUNER.
10
scrolls across the display.
AZ 2030-2035/17
PROGRAM
AZ 2030-2035/17