CDVI Digicode Serie Installationsanleitung Seite 9

INSTALLATION MANUAL
GALEOR
Illuminated RF Keypad
Buttons backlit switch off
except button 5
Delete a single
user code
A5
1 beep
Type the 5 digits
of the USER CODE
1 beep = OK
(4 beeps = Error)
Error message if the
code typed is not in
memory
B
Programming exit*
* The programming mode is limited to 10 sec. without any action on the keypad ( no buttons pressed )
All manuals and user guides at all-guides.com
Type 2 times the
MASTER CODE
Buzzer ON / OFF
A6
1 beep
If the buzzer is
enabled it will
be disabled and
viceversa.
REMINDER:
if the keypad blinks during 1 sec.
at the fi rst touch, check the battery.
FACTORY RECOVER
Master code reset
to factory value
12345
A+1
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec. type
the 5 digits of a
memorized code
3 beeps = OK
Doesn't affect
the user codes
memorized
Recover to
factory settings
B+3
SIMULTANEOUSLY
FOR 30 SECONDS
2 beeps
Within 20 sec. type
the 5 digits of a
memorized code
4 beeps = OK
Deletes all User codes
memorized on the
keypad, reset the link
with the receiver and
resets the Master code
to 12345.
Normal mode
cdvigroup.com
EN
9