EasyGO camo Gebrauchsanweisung Seite 17

All manuals and user guides at all-guides.com
backrest into the passenger seat backrest
and install the seat with a 3-point car seat
belt as in point 1 (fig. 14).
3.Taking the car seat out of the car.
Unbuckle the belt and slide it out of the
seat's runners (fig. 15).
If the seat is installed with ISOFIX
connectors, push the connector release
buttons (fig. 16). You should hear a
characteristic "click" when the connectors
are released.
4.Upholstery removal.
WARNING! Never use the seat without
the upholstery.
Remove the seat upholstery by
unfastening the Velcro (fig. 17). Next,
remove the upper upholstery from the
backrest and the headrest. Start in the
spot marked with the arrow (fig. 18). After
removing all of the top upholstery from
the seat shell, unbutton the elastic bands
(fig. 19). Remove the middle upholstery by
unbuttoning the elastic bands in the spot
marked with the arrow (fig. 20).
To put the upholstery back in place,
perform the actions presented above in
reverse order.
17