Xiaomi Redmi Smart-Armband Pro M2101B1 Benutzerhandbuch Seite 3

Charging the Band
Charge the band before using it for the first time. The band will automatically turn on when
charging.
1. Hold the charging connector close to the contact points on the back of the band, and
then the charging connector will magnetically attach to the contact points of the band.
2. Connect the USB connector of the charging cable to a standard adapter purchased
from a qualified manufacturer at an output voltage of 5 V or higher.
3. The screen of the band will light up and show the charging icon.
Notes:
If the band is not used for a long period of time, the battery will be depleted. Charge the band for
z
about one minute, and then the charging icon will be displayed.
Wipe the band's contact points clean before charging so as to avoid residual sweat or moisture.
z
02