Preface (En) - Zipper Maschinen ZI-WP400TN Betriebsanleitung

11 PREFACE (EN)

Dear Customer!
This operating manual contains information and important notes for safe commissioning and
handling of the Log Saw ZI-WP400TN, hereinafter referred to as "machine".
The manual is an integral part of the machine and must not be removed. Keep it for later
use in a suitable place, easily accessible to users (operators), protected from dust and
moisture, and enclose it with the machine if it is passed on to third parties!
Please pay special attention to the chapter Safety!
Due to the constant further development of our products, illustrations and contents may differ
slightly. If you notice any errors, please inform us.
Technical changes reserved!
Check the goods immediately after receipt and make a note of any complaints on the
consignment note when the delivery person takes them over!
Transport damage must be reported separately to us within 24 hours.
Zipper cannot accept any liability for transport damage not noted.
Copyright
© 2021
This documentation is protected by copyright. All rights reserved! In particular the reprint, the
translation and the removal of photos and illustrations will be prosecuted.
Court of jurisdiction is the regional court Linz or the competent court for 4707 Schlüsslberg,
Austria!
Customer service contact
Z.I.P.P.E.R MASCHINEN GmbH
AT-4707 Schlüsslberg, Gewerbepark 8
Tel 0043 (0) 7248 61116 – 700
Fax 0043 (0) 7248 61116 – 720
info@zipper-maschinen.at
ZIPPER MASCHINEN GmbH
ZI-WP400TN
www.Zipper-Maschinen.at
PREFACE (EN)
23